Buy Now!
New Starter from 1AAuto.com
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, worn or faulty ignition starter switch. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima.
🔧 List of tools used:
• Flat Blade Screwdriver
• 13mm Wrench
• 8mm Wrench
• 10mm Socket
• 17mm Socket
• 8mm Socket
• Needle nose pliers
• Needle nose pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Pick
For More Info visit us at
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Link do Vídeo
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Fantastic , got er done , a million thanks !!!
Just the best car repair videos out there. Saved me thousands over the years and given me the confidence to replace almost any part on my car.
Where is starter on nizzan quest
I just bought a new starter 2 weeks ago and I went out to my car and when I turn the key to start the engine my dashboard lights up but I here a whinning sound and the engine will not crank. What could be the problem??
I would have taken a second to (sandpaper) clean the positive terminal – might save you a voltage drop issue down the road. Thanks for the helpful video.
Your videos are great! I’ve worked on two separate issues using your videos and they were all clear and detailed. Thanks for helping us out!
4:20 how do I get my elbow to do that
Excellent and very reassuring manner ! Thanks for pointing out the different bolt sizes.
I have learn so much with this channel. You guys have helped me sooo much!! I do appreciated the time invested in this kind of videos!
Thank you sir
Why can’t everyone make a simple video without having to give there life story before telling us how to not fix the problems
So again thank you I can always count on you and your channel to get any job done
Well I hope this video will help me, I need to put a starter on a '2018 Nissan Altima SV' in the next couple days, searched youtube but cant find anything close except this one my grandpa & uncle took it off
You forgot to test if the car would start
thanks for this video i havea nissan sentra 1998 hope it s about the same as your video.1 thing is the alumin don t tighten to much info this is great info i be doing the job jAN 2,2021
A word of warning. These starters will give you about a months warning in advance when they are going out. I tried stretching that and had to get the car towed home, luckily I wasn't far. Great Video
Will this work for a 2017 Altima?
Seeing all that corrosion on the starter is a dead giveaway that the inside of that starter is probably just as corroded
Gonna do this next weekend in my 05 Altima . I seen almost all of your Nissan Altima videos . Great work always explain things while doing it and giving a few tips .
What kind of starter is that
You guys are lucky, the older models are more of a pain to remove because the starter sits directly underneath the intake manifold. It can only be remove from underneath the car.
How many bolts to u remove?
Is it the same as for 2007 Nissan maxima
Nice vid bro
Thanks for your videos very helpful
nisan sony how to remove starter model 2013
nisan sony how removed
Just saved about $450 for this replacement. You guys are single handedly responsible for me not wanting to drive this Altima off a cliff!
Thanks so much for posting this video guys! It was very helpful and saved me money. You guys covered every step of the process.
Thank you so much for your video.. Its so detailed …
There is no way that was that easy
How did you get the electrical connector out so easily like I dont feel a back tab on mine please respond asap I'm working on it rn…
Is there a procedure difference between the automatic and manual? I know the starter itself is different.
Is this the same with the 3.5L engine version??
Excellent video – no fluff or bs or click bait. Just a straight up installation video with good information to supplement the replacement of the starter.
Why would anyone thumbs down this? This took me just about 45 mins and I am not the handiest….. thanks guys
On a Nissan Maxima 2004
Is It the same way or it's better doing it from under the engine?
Looks very cramped up , is there an easier way to do it?
Man! Thanks for THAT info! Saved my MAN status with the gf AND saved some bucks! Salute!
Taking out is the easy part putting it back in is completely difficult!!!
Awesome video!
Thank you thank you thank you
Saved me a loooooooot of money with this video. Thank you, sir.
Is it the same process for a 2008 altima
Thanks for the video it really helped and you made the instructions easy to follow 👍
Hey brother! Great video! Any chance you can tell me if this would work for other 4cyl Nissan engines of the same year (I have Nissan Xtrail a Canadian model with a similar looking engine bay.
Ill do more research myself but if you KNOW that'd be great! Thanks!
Thanks my man, great video I just change mine thanks to you.
Excellent camera work , parts n tool's one needs, clear narrative…. Big Up's